PLOT REPORT
-----------

Report File    : M:\MACH3\2011\Ethernet modbus y mas\Step2mach\step2mach_schematics\mach_schematics\mach_diy_v3_1 (PCB - PLOT REPORT).txt
Report Written : Wednesday, January 04, 2012
Design Path    : M:\MACH3\2011\Ethernet modbus y mas\Step2mach\step2mach_schematics\mach_schematics\mach_diy_v3_1.pcb
Design Title   : 
Created        : 04/01/2012 19:55:05
Last Saved     : 
Editing Time   : 1 min
Units          : thou (precision 0)

DEVICE SETTINGS
---------------

---------------
Gerber Settings
---------------

    Leading zero suppression.
    G01 assumed throughout.
    Line termination <*> <CR> <LF>.
    2.3 format absolute inches.

    Format commands defined in Gerber file.
    Aperture table defined in Gerber file.
    Hardware arcs allowed.

--------------
Drill Settings
--------------

    Excellon Format 1
    Format 2.3 absolute in mm.
    No zero suppression.


PLOTS OUTPUT
------------

Gerber Output
-------------

    "M:\MACH3\2011\Ethernet modbus y mas\Step2mach\step2mach_schematics\mach_schematics\mach_diy_v3_1 - Documentation.gbr"

    Layers:
    -------
    Documentation

    D-Code    Shape  (thou)
    -----------------------
    D10       Round 12.00
    D11       Round 4.33
    D12       Round 5.60
    D13       Round 4.00
    D14       Round 3.15
    D15       Round 5.00
    D16       Round 3.94


Gerber Output
-------------

    "M:\MACH3\2011\Ethernet modbus y mas\Step2mach\step2mach_schematics\mach_schematics\mach_diy_v3_1 - Top.gbr"

    Layers:
    -------
    Top

    D-Code    Shape  (thou)
    -----------------------
    D10       Round 12.00
    D17       Rectangle 59.06 X 78.74 Rotation 90
    D18       Rectangle 62.99 X 94.49 Rotation 90
    D19       Rectangle 59.06 X 78.74
    D70       Round 126.11
    D71       Oval 52.00 X 104.00 Rotation 90
    D20       Oval 60.00 X 120.00
    D21       Oval 44.00 X 88.00 Rotation 90
    D22       Rectangle 47.24 X 70.87 Rotation 90
    D23       Rectangle 47.24 X 70.87
    D24       Rectangle 39.37 X 62.99
    D25       Rectangle 212.60 X 244.09
    D26       Round 55.43
    D27       Round 59.37
    D28       Round 94.49
    D29       Round 137.92
    D72       Round 78.74
    D73       Round 64.50
    D74       Round 128.00
    D75       Octagon 50.00
    D76       Round 24.00
    D77       Round 32.00
    D78       Round 16.00


Gerber Output
-------------

    "M:\MACH3\2011\Ethernet modbus y mas\Step2mach\step2mach_schematics\mach_schematics\mach_diy_v3_1 - Top Glue.gbr"

    Layers:
    -------
    Top Glue

    D-Code    Shape  (thou)
    -----------------------
    D79       Round 1.00


Gerber Output
-------------

    "M:\MACH3\2011\Ethernet modbus y mas\Step2mach\step2mach_schematics\mach_schematics\mach_diy_v3_1 - Top Doc.gbr"

    Layers:
    -------
    Top Doc

    D-Code    Shape  (thou)
    -----------------------
    D13       Round 4.00
    D17       Rectangle 59.06 X 78.74 Rotation 90
    D18       Rectangle 62.99 X 94.49 Rotation 90
    D19       Rectangle 59.06 X 78.74
    D70       Round 126.11
    D71       Oval 52.00 X 104.00 Rotation 90
    D20       Oval 60.00 X 120.00
    D21       Oval 44.00 X 88.00 Rotation 90
    D22       Rectangle 47.24 X 70.87 Rotation 90
    D23       Rectangle 47.24 X 70.87
    D24       Rectangle 39.37 X 62.99
    D25       Rectangle 212.60 X 244.09
    D26       Round 55.43
    D27       Round 59.37
    D28       Round 94.49
    D29       Round 137.92
    D72       Round 78.74
    D73       Round 64.50
    D74       Round 128.00
    D75       Octagon 50.00
    D79       Round 1.00
    D80       Round 98.00
    D81       Round 18.00
    D82       Round 6.00
    D83       Round 8.00


Gerber Output
-------------

    "M:\MACH3\2011\Ethernet modbus y mas\Step2mach\step2mach_schematics\mach_schematics\mach_diy_v3_1 - Bottom.gbr"

    Layers:
    -------
    Bottom

    D-Code    Shape  (thou)
    -----------------------
    D10       Round 12.00
    D70       Round 126.11
    D71       Oval 52.00 X 104.00 Rotation 90
    D20       Oval 60.00 X 120.00
    D21       Oval 44.00 X 88.00 Rotation 90
    D26       Round 55.43
    D27       Round 59.37
    D28       Round 94.49
    D29       Round 137.92
    D72       Round 78.74
    D73       Round 64.50
    D74       Round 128.00
    D75       Octagon 50.00
    D77       Round 32.00


NC Drill Output
---------------

    Output:
    -------
    Plated Round Drill Holes
    Plated Slots
    Plated Board Outlines

    "M:\MACH3\2011\Ethernet modbus y mas\Step2mach\step2mach_schematics\mach_schematics\mach_diy_v3_1 - Drill Data - Through Hole.drl"


    Tool             Size        Count  ID
    --------------------------------------
    T001        00.024 in            2   D
    T002        00.025 in            8   L
    T003        00.032 in           84   B
    T004        00.035 in            8   E
    T005        00.039 in            4   F
    T006        00.040 in           10   C
    T007        00.043 in           25   J
    T008        00.051 in            2   I
    T009        00.063 in            2   G
    T010        00.118 in            4   A
    T011        00.120 in            2   K
    T012        00.130 in            2   H
    --------------------------------------
    All                            153
    --------------------------------------

NC Drill Output
---------------

    Output:
    -------
    Unplated Round Drill Holes
    Unplated Slots
    Unplated Board Outlines

    "M:\MACH3\2011\Ethernet modbus y mas\Step2mach\step2mach_schematics\mach_schematics\mach_diy_v3_1 - Drill Data - Through Hole (Unplated).drl"


    Tool             Size        Count  ID
    --------------------------------------
    T001        00.025 in            1   
    --------------------------------------
    All                              1
    --------------------------------------

Gerber Output
-------------

    "M:\MACH3\2011\Ethernet modbus y mas\Step2mach\step2mach_schematics\mach_schematics\mach_diy_v3_1 - Drill Ident Drawing - Through Hole.gbr"

    Layers:
    -------

    Drill Ident Drawing
    -------------------

    Drill     Plated    Size      Shape     ID        
    --------------------------------------------------
    118       Y         100       Round     A         
    32        Y         100       Round     B         
    40        Y         100       Round     C         
    24        Y         100       Round     D         
    35        Y         100       Round     E         
    39        Y         100       Round     F         
    63        Y         100       Round     G         
    130       Y         100       Round     H         
    51        Y         100       Round     I         
    43        Y         100       Round     J         
    120       Y         100       Round     K         
    25        Y         100       Round     L         
    --------------------------------------------------

    D-Code    Shape  (thou)
    -----------------------
    D15       Round 5.00
    D84       Round 100.00


End Of Report.
